0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping
    Type Description
    Model: Deluxe Models - DX8, DX10, & DX12 (shown)
    Process: Quick-Start Guide
    Location: Warehouse

    Here we show the Quick Start process for your EZ Lite Cruiser Deluxe Model. The same process applies to all 3 of the models, but in this example we use a DX12. Please make sure to also watch the video which explains the battery connection and charging.

    Model: All Models (Standard Model used as Example)
    Process: Battery Connection & Charging
    Location: Warehouse

    In this video we explain the battery connections, as well as the charging on-board and off-board. In this example, a Standard Model is used -- but the overall process and explanation of how the battery connects and charging is accomplished is the same on the Deluxe Models. Both the 10 Ah battery, as well as 15 Ah battery are shown being connected and stored on the chair.

    Model: Deluxe Models - DX8, DX10, & DX12 (shown)
    Part: Seat Belt
    Location: Front Office

    This video shows how to install the Seat Belt on your EZ Lite Cruiser Deluxe Model frame, and it is the same for either model DX8, DX10 or DX12 (shown in this video.) The main take away from this video is that you will need to raise the removable cushion from the back support, and run the seat belt around the outside of the frame. Then, simply replace the back support cushion. Adjust the length of the seat belt to your needs.

    Model: Deluxe Models - DX8, DX10 (shown), & DX12
    Accessory: Headrest Attachment
    Location: Workshop/Warehouse

    This video shows the a more detailed process for installing the headrest attachment on your EZ Lite Cruiser Deluxe Model. The process is very similar to the steps needed to installing it on a Standard Model as well. In the video, we identify the components of the Headrest accessory, and then step by step walk you through the installation. The most current version of the headrest attachment is used. Please note, at times the accessory components may vary depending on when you had purchased yours.

    Model: Deluxe Models - DX8, DX10, & DX12 (shown)
    Accessory: Cane Holder
    Location: Warehouse

    Here we guide you through the identification of the parts of the Cane Holder and how/which parts are used on the Deluxe Models. Please note, the Cane Holder is a universal accessory for all of our models, and comes in 3 parts. Only one of the parts (elastic band) is usable on the Deluxe Models, and is the only one required to securely mount your cane (or walker when 2 cane holders are used) to your EZ Lite Cruiser.

    Model: Standard Model
    Process: Unfolding, Alternate
    Location: Front Office

    Here we show an alternate way of unfolding the EZ Lite Cruiser Standard Model. This method may be helpful when the process is new to you and the bolts are still stiff on a newly constructed model. They will loosen up over time, and you will become more familiar with the unfolding and folding process the more you do it.

    Model: Standard Model
    Accessory: Push Handles
    Location: Workshop/Warehouse

    This video shows how to attach the Push Handles on your EZ Lite Cruiser Standard Model. The main thing to remember is that you will need to create some room between the back support straps to expose some frame metal. The clamps for the push handles will attach to the frame metal.

    Model: Standard Model
    Accessory: Adjustable Leg Rests (with L-shaped Latch)
    Location: Workshop/Warehouse

    This video shows how to install the EZ Lite Cruiser Adjustable Leg Rests, which have an L Shaped latch on them, to the EZ Lite Cruiser Standard Model. There are a couple variety of Adjustable Leg Rests, the other with a 'Flat' latch, and the steps to installing it are just the same as this one with the :-Shaped latch. The most important things to do when installing these is to make sure the Clamps are very securely tightened to the frame and the supporting Rods, and that when you go to Latch on the leg rest to the Rod, you do not spin the Rod out of place. Simply apply the Latch over the Tooth of the Rod, and do not attempt to hook it over the Tooth by spinning each of the individual Leg Rests too far inward.

    Model: Standard Model
    Accessory: Foot Rest Extension
    Location: Warehouse

    In this video we show the (slightly modified) newer version of our Foot Rest Extension being installed on the EZ Lite Cruiser Standard Model, in more detail. Please note, this Foot Rest Extension ONLY works on our Standard Model, and not on any of the Deluxe Models.

    Model: Standard Model
    Part: Seat Belt
    Location: Front Office

    This video shows how to install the Seat Belt on your EZ Lite Cruiser Standard Model frame. The main take away from this video is that you will need to raise the removable cushion from the back support, and run the seat belt around the outside of the frame. Then, simply replace the back support cushion. Adjust the length of the seat belt to your needs.

    Model: Standard Model
    Accessory: Cane Holder
    Location: Workshop/Warehouse

    This video shows how to install the Cane Holder on your EZ Lite Cruiser Standard Model. The Cane Holder comes with 3 pieces, and for the Standard Model, you can mount all 3 or at least 2 of them. One of them (the velcro strap) may not be necessary, if you do not require it. The main components will be the flexible strap and the cup to hold the bottom of the cane.

    Model: All Models (Standard Model used as Example)
    Part: Joystick Programming Kit
    Location: Warehouse

    This video shows how to use the EZ Lite Cruiser Joystick Programming Kit. In the video, various settings, such as Acceleration, Maximum Forward Speed and Left/Right Turning Speed have their values altered. Changes are performed on an EZ Lite Cruiser Standard Model, however, the same process applies to all models, such as the Deluxe DX8, DX10 and DX12. The controller system is the same type and programming it is done the same way as shown in this video.

    Model: Standard Model
    Part: Front Wheels
    Location: Warehouse

    This video shows how to replace the Front Wheels on your EZ Lite Cruiser Standard Model. You will simply need a hex wrench and your new front wheels for replacement. The same bolts can be re-used, unless they are damaged.

    Model: Standard Model
    Part: Arm Rest Bolt
    Location: Front Office

    This video shows how to replace or tighten the bolt that holds the Arm Rest to the rest of the EZ Lite Cruiser Standard Model frame. Due to the folding aspect of the Standard Model, the top half of the back support folds down, and this bolt is part of one of the hinge points that as a whole make up the folding process. Every so often, you may need to tighten this bolt, or replace it if it is damaged.

    Model: Deluxe Model
    Accessory: Arm Rest Widening Kit
    Location: Warehouse

    This video shows how to install the Arm Rest Widening Kit on your EZ Lite Cruiser Deluxe Model. If you purchased your Deluxe Model with the standard width between the Arm Rests originally, and have purchased the Arm Rest Widening Kit to extend the amount of room between the arm rests, follow this helpful video.

    Model: Deluxe Model
    Accessory: Foot Rest Extender Kit
    Location: Warehouse

    This video shows how to install the Foot Rest Extender Kit on your EZ Lite Cruiser Deluxe Model. If you purchased your Deluxe Model with the standard distance for the Foot Rest Plate originally, and have purchased the Foot Rest Extender Kit to extend the distance of the Foot Rest Plate from your EZ Lite Cruiser, follow this helpful video.

    Model: Deluxe Model
    Accessory: Deluxe Seat Belt Kit
    Location: Warehouse

    This video shows how to install the Deluxe Seat Belt Kit on your EZ Lite Cruiser Deluxe Model. If you purchased your Deluxe Model without the Deluxe Seat Belt Kit originally, and have purchased the Seat Belt Kit to install on your chair after the fact, follow this helpful video.

    Model: Deluxe Model
    Accessory: Adjustable Leg Rests
    Location: Warehouse

    This video shows the step by step instructions on how to install the Adjustable Leg Rests on your EZ Lite Cruiser Deluxe Model. Please follow the directions exactly for proper installation. If you need further assistance, please view the step by step instructions, which is also available here in PDF format.

    Model: Deluxe Model
    Accessory: Adjustable Leg Rests
    This PDF file shows the step by step instructions on how to install the Adjustable Leg Rests on your EZ Lite Cruiser Deluxe Model. Please follow the directions exactly for proper installation. If you need further assistance, please try watching the video of the process, which is also available here.

    Model: All Models
    Part: Joystick Button Pad
    This PDF file shows the step by step instructions on how to replace the Joystick Button Pad on your EZ Lite Cruiser Joystick. Please follow the directions exactly for proper installation.

    Model: Standard Model
    Accessory: Joystick Caregiver Mount
    This PDF file shows the step by step instructions on how to install the Joystick Caregiver Mount on your EZ Lite Cruiser Standard Model. Please follow the directions exactly for proper installation.

    Model: Deluxe Model
    Accessory: Joystick Caregiver Mount
    This PDF file shows the step by step instructions on how to install the Joystick Caregiver Mount on your EZ Lite Cruiser Deluxe Model. Please follow the directions exactly for proper installation.

    Model: Standard Model
    Part: Rear Wheels
    This PDF file shows the step by step instructions on how to install new Rear Wheels on your EZ Lite Cruiser Standard Model. Please follow the directions exactly for proper installation. We recommend having this done by a professional to ensure it is done properly.