0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping

     

    How to Replace the Front Wheel Assembly (Male & Female Bolt) on the EZ Lite Cruiser Deluxe Models

    With the battery disconnected and removed, put the chair on the back rest with the front wheels up in the air.

    Using the provided shortened hex wrench, reach inside the frame next to the front wheel fork and hold the bolt head still there.

    On the outside of the frame, unscrew the bolt and remove it from the frame.

    Save the white nylon washer.

    The front wheel leg will be loose at this point. You can let it rest once you remove the bolt head from the inside of the frame part.

    Take some Loctite RED threadlocker and apply it to the provided threaded bolt head.

    Insert the bolt head into the inside part of the frame. There is a fitted groove to hold the bolt head still.

    Insert the provided receptacle bolt from the outside of the frame, and put the nylon washer back on the end of the bolt that will be between the frame parts.

    Then, attach the front wheel leg to the bolt.

    Use your finger to hold the inside frame bolt head still as you screw the receptacle bolt in from the outside.

    Make sure the bolts are tightened together all the way through, making the frame parts come together tightly.

    Let it sit for 30-45 minutes for the threadlocker glue to harden, before using the chair again.