Replacing Frame End Cap (Purple) - Deluxe Models

 

How to Replace the Frame End Cap on the EZ Lite Cruiser Deluxe Models

Using a screwdriver, unscrew the set screws on both sides of the frame end cap.

Then, gently remove the frame end cap from the frame.

Next, put the new frame end cap in place.

Lastly, screw the set screws on both sides of the frame end cap back in place.

*** Please Note: When performing this replacement on any chair with 12” rear wheels, such as the SX12, DX12, or WX12, we recommend removing/unbolting the motor to get better access to the inner side screw that hold the Frame End Cap on to the Frame. ***