0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
    Total
    Check Out Continue Shopping

    Rotate Your Screen on Mobile or Tablet

    Here is a list of videos that show the Service & Maintenance of the EZ Lite Cruiser Deluxe Models, in no particular order.

    Deluxe Models - Regular, Slim, Wide - DX10, DX12, SX10, SX12, WX10, WX12 - Replacing 7.5 Inch Front Wheels

    This video shows how to replace the 7.5" front wheels used on our DX10, DX12, SX10, SX12, WX10, WX12 models. You simply remove the bolt that holds it on to the wheel, swap the wheel out with a new one, and put the bolt back in to secure it to the fork.

    Click Here to Watch the Video.

    Click Here to order a Single 7.5 Inch Front Wheel.
    Click Here to order a Set of Two 7.5 Inch Front Wheel.

    Applies to:  Deluxe Models: Regular, Slim, Wide; SX10, SX12, DX10, DX12, WX10, WX12;

    Deluxe Models - Regular, Slim, Wide - SX12, DX12, WX12 - Replacing a 12 Inch Rear Wheel

    This video shows how to replace a 12" Rear Wheel used on the SX12, DX12, WX12 models. Please follow the instructions carefully, as the wheels bolts are glued in with Loctite to prevent them from becoming undone. So to remove them, you do have to heat the area up with a hot air gun to loosen the glue, before attempting to undo the bolts. When putting the new wheel on, don't forget to put Loctite on the new hardware.

    Click Here to Watch the Video.

    Click Here to order a Single 12 Inch Rear Wheel.
    Click Here to order a Set of Two 12 Inch Rear Wheel.

    Applies to:  Deluxe Models: Regular, Slim, Wide; SX12, DX12, WX12; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - SX12, DX12, WX12 - Replacing a Motor (with 12 Inch Wheel)

    This video shows how to replace the motor on the SX12, DX12, WX12 models. In this example, we use a DX12 and the replacement motor has the wheel already attached to it. This process can be done with or without the wheel being attached to the motor. If the wheel needs to be removed, or if it is already off, watch our other videos to see how to replace the wheel itself.

    Click Here to Watch the Video.

    Click Here to order a Right Side *X12 Motor with the Wheel attached.
    Click Here to order a Left Side *X12 Motor with the Wheel attached.
    Click Here to order a Right Side *X12 Motor WITHOUT the Wheel attached.
    Click Here to order a Left Side *X12 Motor WITHOUT the Wheel attached.

    Applies to:  Deluxe Models: Regular, Slim, Wide; SX12, DX12, WX12; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Kickstand

    This video shows the process to replacing the kickstand on your Deluxe models, and applies to all of them. The kickstand is integral to allowing the chair to stand upright. If it becomes damaged and needs to be replaced, follow these simple steps. Depending on the production date of your specific chair, you may have one or two (one per side) kickstands attached.

    Click Here to Watch the Video.

    Click Here to order a Kickstand Full Assembly.
    Click Here to order a Kickstand Plastic Tube Extension.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Arm Rest Pads

    This video shows how to replace the arm rest pads on your chair. When you're learning to drive, or just from general usage, the arm rest pads can become damaged or worn and need to be replaced.

    Click Here to Watch the Video.

    Click Here to order a Single Arm Rest Pad.
    Click Here to order a Set of Two Arm Rest Pads.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - SX10, SX12, DX10, DX12, WX10, WX12 - Replacing the Bearing in a 7.5 Inch Front Wheel

    This video shows how to replace the bearings that are inside the 7.5" Front Wheels in the SX10, SX12, DX10, DX12, WX10, WX12 models. The bearings allow for the front wheel to rotate around inside the fork. Over time, they will get worn down and eventually need to be replaced in order to restore proper function of the front wheels.

    Click Here to Watch the Video.

    Click Here to order Front Wheel Bearings.

    Applies to:  Deluxe Models: Regular, Slim, Wide; SX10, SX12, DX10, DX12, WX10, WX12; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Back Support Straps

    This video shows how to replace the back support straps on the chair, and applies to all Deluxe models. The back support straps provide the support to the cushion and the back rest of the seating area. Over a long time of usage, they may sag and may need to be adjusted or replaced.

    Click Here to Watch the Video.

    Click Here to order Back Support Straps for the Deluxe Slim Models.
    Click Here to order Back Support Straps for the Deluxe Regular Models.
    Click Here to order Back Support Straps for the Deluxe Wide Models.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Back Support Bar Cushion

    This video shows how to replace the back support bar cushion on the chair. In the event it becomes lost or damaged, it can be replaced quite easily.

    Click Here to Watch the Video.

    Click Here to order a Back Support Bar Cushion for the Deluxe Slim Models.
    Click Here to order a Back Support Bar Cushion for the Deluxe Regular Models.
    Click Here to order a Back Support Bar Cushion for the Deluxe Wide Models.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Back Support Cushion

    This video shows how to replace the back support cushion on the chair. In the event this cushion is dirty and needs to be cleaned, gets torn, or just needs to be replaced, it can be done very easily, as shown.

    Click Here to Watch the Video.

    Click Here to order a Back Support Cushion for the Deluxe Slim Models.
    Click Here to order a Back Support Cushion for the Deluxe Regular Models.
    Click Here to order a Back Support Cushion for the Deluxe Wide Models.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Seat Cushion

    This video shows how to replace the seat cushion on the chair. In the event this cushion is dirty and needs to be cleaned, gets torn, sags from long term usage, or just needs to be replaced for any reason, it can be done very easily, as shown.

    Click Here to Watch the Video.

    Click Here to order a Seat Cushion with Cover for the Deluxe Slim Models.
    Click Here to order a Seat Cushion with Cover for the Deluxe Regular Models.
    Click Here to order a Seat Cushion with Cover for the Deluxe Wide Models.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - Replacing the Frame End Cap

    This video shows how to remove the frame end cap on the chairs. Since this is a plastic piece, it may at some point get damaged and need to be replaced for a pleasing aesthetic. Please note, on models with 12" rear wheels, you may need to remove the motor or wheel to gain access to the screw that holds the frame end cap on.

    Click Here to Watch the Video.

    Click Here to order the Frame End Caps.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - DX12 Used as Example - Replacing the Anti-Tilt Wheels by Hand

    This video shows how to remove and replace the anti-tilt wheels of the chair, using just your hand. If you're able to push the pins in with enough force, watch how it is done here. If you feel that pressing it by hand is not working, you can also use a tool, shown in another video.

    Click Here to Watch the Video.

    Anti-Tilt Wheels are included with every purchase of a Deluxe Model. If they are lost, damaged or just need replacing, you can order them here:

    Click Here to order a Single Anti-Tilt Wheel.
    Click Here to order a Set of Two Anti-Tilt Wheel.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]

    Deluxe Models - Regular, Slim, Wide - DX12 Used as Example - Inserting and Removing Anti-Tilt Wheels with a Tool

    This video shows to to insert and remove the anti-tilt wheels of the chair, using one of the small hex wrenches provided in your tool kit. The use of this tool will give you a better way to press the push pin to release the anti-tilt wheels from the frame housing.

    Click Here to Watch the Video.

    Anti-Tilt Wheels are included with every purchase of a Deluxe Model. If they are lost, damaged or just need replacing, you can order them here:

    Click Here to order a Single Anti-Tilt Wheel.
    Click Here to order a Set of Two Anti-Tilt Wheel.

    Applies to:  Deluxe Models: Regular, Slim, Wide; All Variations; [DX12 is Used as Example]